Which motor mounts?

[clubfootedmidget]

After taking the car out for an hour yesterday it became immediately apparent that new motor mounts were needed. Anyone got a brand they like or that can be used for A2 VR swaps? I'd just use regular MK3 type motor mounts right?

[boostin20v]

what rear subframe and front cross member were used?

[evolveVW]

what Stu said. It completely determines what mounts you need.

[lotar_6]

If you don't know, yank the old one(s) and post a pic.

[clubfootedmidget]

I don't know what rear subframe and front cross members were used.

[BUNNYLOVE]

I would go to germanautoparts.com and check out the pictures.. match them up with what you have. VR mounts didn't change that much compared to the 4cyl cars. Look at the pics of the old and newer cars and that will yield your answer.
Its just the subframe also not the rear subframe.

[boostin20v]

http://monty.syr.edu/vw/mine/mk2/2006-06-22/IMG_1140.JPG

thats a 91 GTI 4cyl rear subframe. if your passengerside mount looks like that you need Mk2 mounts. If your passengerside looks more like the driverside mount you need Mk3 mounts.

For the front crossmember I'm pretty sure the Mk2 and Mk3 mounts differ by the number of bolts they use to mount to the cross bar. Mk2 mounts using 2, Mk3 mounts using 1.

[BUNNYLOVE]

If that is the rear subframe, where is the front subframe?

[clubfootedmidget]

Well I got my answer: 98 Gti VR6 Subframe.

[boostin20v]

which crossmember?

ya ya so there is no rear/front subframe but one subframe.

[clubfootedmidget]

mk3 gti