PDA

View Full Version : torque specs????

USOPHUNKE
06-25-2006, 12:31 PM
I need a few specs...

1. fly wheel bolts

2. pressure plate bolts

3. arp head stud bolts 16v what oil to lube them

4. valve cover

5. bell housing to eng. bolts....


any help would be great..I dont have a bently...
turbosnow
06-25-2006, 12:39 PM
1. Realy Tight
2. Tight
3. ARP says 85 ft lbs with 30wt motor oil, find a diagram of the sequence though it is important to do it right.
4. PLease......like 15-20 I think....
5. Really fing tight....
turbosnow
06-25-2006, 12:41 PM
addnda, for heal bolts you shoudl always do it in steps as well....usually like 30,60 and 85 ft lbs or something.
USOPHUNKE
06-25-2006, 01:07 PM
your funny adam......

remember last time I put a flywheel in the bolts backed out on ryan.....I dont want that to happen again..
BUNNYLOVE
06-25-2006, 01:09 PM
the head studs are 65 w/arp moly lube. I'll go with Adam on the oil only method. Definetly use steps, I usually do 10-15lb intervals. I usually do 3 steps.
Definetly torque the fywheel bolts.
USOPHUNKE
06-25-2006, 01:10 PM
the head studs are 65 w/arp moly lube. I'll go with Adam on the oil only method. Definetly use steps, I usually do 10-15lb intervals. I usually do 3 steps.
Definetly torque the fywheel bolts.


any idea on the torque spec for the flywheel..?
BUNNYLOVE
06-25-2006, 01:18 PM
i'll check
VWTUNING
06-25-2006, 01:18 PM
ive never had a problem just making everything nice and tight, if I have any doubts I will use a little loctite and double check every bolt (re-torque everything before I move on to the next step).

Are you gonna be working on the car today? If so I'll stop by on the way to the garage, I kinda wanna check out the side exit.
BUNNYLOVE
06-25-2006, 01:31 PM
The spec is 44lb/ft plus a 90 degree turn.
USOPHUNKE
06-25-2006, 01:41 PM
The spec is 44lb/ft plus a 90 degree turn.
awsome thanks



pete I will be home kinda putzin with stuff and then at 2 when bella takes her nap will be doing the clutch install....


your welcome to come check out the side exit......
customfabvw
06-25-2006, 02:14 PM
a quarter turn before they snap!!!!!!!!!
boostin20v
06-25-2006, 03:39 PM
any help would be great..I dont have a bently...

:eek::eek::eek::eek::eek::p
USOPHUNKE
06-25-2006, 03:52 PM
:eek::eek::eek::eek::eek::p



I know...crazy...but the rado bently doesnt have 16v stuff and the engine is all 16v I prob should get a passat one or something for a 16v 02a setup