syr cnc machine shops?

[TROOPER95]

im looking for good info on any good cnc machine shops in syr. i need an exaust block off plate made for a holset turbo. its a 5 bolt pattern but not a t3/t4 flange but similer. the dimensions of the piece i need will be around 1/4in thick 61/2in tall and 5 in wide. if you have any ideas please help thanks.

[MIdub]

you looking to get it machined out or do that yourself? or just need the flat steel piece?

[TROOPER95]

you looking to get it machined out or do that yourself? or just need the flat steel piece?

yea iv thought about it at all angles and i think if i cant find one im just going to cut one with a torch

[Dan McBoost]

I have a friend that's a machinist. Does CNC quality work without a CNC:)

If you are planning on using a CNC, who is drawing up the part?

[iceVee]

Sharlay Machine & Design
(315) 673-1343
2483 Roman Ave, Marcellus, NY 13108

Joe Ciarlei is a local SCCA member, and does work for places like Pennon Composites in Jamesville. He does low-volume race car parts, and can easily do what you need. He's a car guy too. Does excellent work, and does it fast.

He's done a bunch of work for me, and I highly recommend him. He can also do the CAD work to draw up the part if you need that too.

-Karl

[TROOPER95]

Sharlay Machine & Design
(315) 673-1343
2483 Roman Ave, Marcellus, NY 13108

Joe Ciarlei is a local SCCA member, and does work for places like Pennon Composites in Jamesville. He does low-volume race car parts, and can easily do what you need. He's a car guy too. Does excellent work, and does it fast.

He's done a bunch of work for me, and I highly recommend him. He can also do the CAD work to draw up the part if you need that too.

-Karl

awsome thanks ill try him and see what happens.

[boostin20v]

i need an exaust block off plate made for a holset turbo

you want to block off the exhaust outlet on the turbo :icon_beuj:

[POSgti]

faster spool dude !

[VWTUNING]

Prolly the only way to spool up that turbo on a 4 cylinder :laugh:

When I did the downpipe on my tdi I took a piece of 1/4" steel plate and cut out the flange with a sawzall, cut off wheel and grinder. :icon_tup:

[meatwad!!]

this thread is full of fail.

[TROOPER95]

Prolly the only way to spool up that turbo on a 4 cylinder :laugh:

When I did the downpipe on my tdi I took a piece of 1/4" steel plate and cut out the flange with a sawzall, cut off wheel and grinder. :icon_tup:

i was so close to doing that then i found a place in oswego that would let me do it for just the cost of the steal plate 20 bucks but thanks! how is the diesel now? and no not block off the exaust but to block off the waste gate so i can run an extenal wastegate am still going to have a hole in the plate for the exaust.

[MIdub]

just weld the flapper shut from the internal wastegate

[allstarrme]

Good luck with that, Was it RD fabs?
and good luck spooling that thing with an 8v

[meatwad!!]

just weld a plate onto the exhaust side...